Quick answers.
- A Florida pricing guide estimates $1,200–$4,500 for a full-cage rescreen with standard fiberglass mesh. That is a typical range, not a bid for your cage.
- The same guide groups many jobs as about $1,200–$2,000 for a small patio or partial rescreen, $2,000–$3,500 for a standard enclosure, and $3,500–$4,500 or more for large or custom cages.
- A Southwest Florida contractor estimates $1,500–$4,500 for an average residential cage, with large or two-story cages running higher.
- Some contractors estimate about $35–$90 per standard ground-level panel; a minimum visit charge is common on small repairs.
What Florida estimates look like.
$1,200–$4,500
A Florida pricing guide estimates $1,200–$4,500 for a full-cage rescreen with standard fiberglass mesh. It is a helpful starting point for your conversation with a contractor.
For regional context, a Southwest Florida screen contractor estimates $1,500–$4,500 for an average residential pool cage, with large or two-story cages running higher.
Florida pricing guide $1,200–$4,500
Southwest Florida contractor $1,500–$4,500
Typical ranges, labeled as estimates.
| Job | Typical range or estimate | Source of the figure |
|---|---|---|
| Small patio or partial rescreen | $1,200–$2,000 | Florida pricing guide |
| Standard pool enclosure, full rescreen | $2,000–$3,500 | Florida pricing guide |
| Large or custom enclosure | $3,500–$4,500 or more | Florida pricing guide |
| Full-cage rescreen, standard mesh, overall band | $1,200–$4,500 | Florida pricing guide |
| Standard ground-level panel repair | About $35–$90 per panel | Contractor estimates; a minimum visit charge is common |
| Average residential cage (regional context) | $1,500–$4,500 | Southwest Florida contractor estimate (large or two-story often higher) |
These are typical ranges or estimates, not a bid for your cage. Your contractor’s written quote is the number to plan around.
Panel repairs cost less. Some contractors estimate about $35–$90 per panel for a standard ground-level panel with fiberglass mesh, and a minimum visit charge is common for small jobs. Your on-site quote is the number to plan around.
What changes the estimate?
- Scope: all wall and roof panels, selected panels, doors, or only a lanai.
- Mesh: exact product, weave, brand and areas where it will be installed.
- Height and access: tall roof panels, obstructions and equipment needs.
- Condition: spline, fasteners, doors and frame work are each priced on their own.
- Travel and minimums: especially for a regional company or a small repair.
- Coastal exposure: salt air on Hutchinson Island and near the inlet can change material and fastener choices.
These are the factors contractors commonly list. Your contractor’s on-site visit turns them into your quote.
Ask for these line items.
- Exactly which wall, roof and door panels are included?
- What manufacturer and mesh specification will be used?
- Are removal, disposal, new spline and cleanup included?
- Which screws, door parts or framing work are extra?
- Are access equipment, travel, minimum charges and taxes included?
- What happens if concealed damage changes the scope?
- What are the deposit, balance and written warranty terms?
Keep the written scope beside each price so you are comparing like with like.
When a cheaper repair may be enough.
If damage is limited and the remaining mesh is sound, ask about individual panels. Ask whether a minimum visit charge applies. If the mesh is brittle throughout, compare repeated patching with a complete rescreen estimate.
Compare full rescreening with panel repair, or take the contractor-question checklist to your estimate appointment.